18''
Full Round Set |
6000 SERIES FULL CIRCLE
REV-A-SHELF SYSTEM
WITH TELESCOPING PIVOT HARDWARE
- Locate the bottom pivot by placing one of the
shelves on the base of the cabinet and marking
through the center hole making sure the shelf will
have at least 3/8 in. side clearence all around.
- Pilot drill (1/8 in. dia.) holes and fasten the
bottom pivot with four (4) 1/2" x #8 truss
head wood screws.
- Slide the collar assembly over the center shaft
and start the screw into the hole in the center
shaft.
- Insert the upper shaft assembly all the way into
the center shaft.
- Set the shaft assembly on the bottom pivot and
extend the upper shaft to the top of the cabinet.
Plumb with level to locate the center for the top
pivot bracket. Pilot drill (1/8" in. dia.)
holes and fasten the top pivot with four (4) 1/2
in. x #8 truss head wood screws.
- You are now ready to assemble the unit inside
the cabinet. Place the shelves inside the cabinet
over the bottom pivot bracket and slide the shaft
assembly through the shelves.
- Lift the shaft assembly and engage it in the
bottom pivot, whie holding the shelves up with
one hand. Extend the upper shaft assembly and engage
it in the top pivot bracket and tighten the locking
screw on the collar assembly securely.
- Adjust the shelves to the desired heights and
tighten the shelf locking screws securely. NOTE:
A little lubricant (white grease or equivalent)
applied to the top and bottom pivot will insure
quiet and smooth turning.
|
 |
Half Moon Corner Shelf
Swing Outs
Easy access for hard-to-reach corners! Use these
half moon swingouts to get better access to corner
cabinets. The durable plastic shelves easily mount
to cabinet bottom or existing shelf. Then just swing
the shelf and pull out for complete access to your
corner storage. Easy to clean, the shelves can be
used separately, or in combination with the Half
Moon Hardware Kit which mounts any two shelves in
a stacked arrangement.
Half
Moon Corner Shelf Swing Outs
|
 |
Rotating Corner Shelf
Sets
Our Rotating Corner Shelf Sets are of a higher quality
than you'll find at your local hardware store. Polymer
bushings and self-lubricating bearings provide years
of smooth, quite operation. The patented detent system
positions the pie cut shelf for easier access. All
systems come complete with attractive chrome plated
center posts.
Rotating
Corner Shelf Sets
|
 |
Full Round Shelf Hardware
Full Round Shelf hardware includes top and bottom
pivots, an upper and lower center post assembly,
a collar assembly, two shelf supports and screws.
Adjusts in a range of 22- 1/2'' to 33'' . 3/4'' diameter
center post.
Full
Round Shelf Hardware
|
 |
Upper Cabinet Lazy Susan
System
Lazy Susan system is made with a D-cut design that
works perfectly with typical corner cabinet layouts.
Set includes two 20'' diameter trays, a center post
that adjusts from 24'' to 31'' inside the cabinet
and mounting hardware.
Upper
Cabinet Lazy Susan System
|
 |
Multi Shelf Lazy Susans
For pantry or utility closets, choose the 5 shelf
package. Both are designed for 24'' deep cabinets.
Features of the shelves include the ''D'' shape that
allows clearance for rack storage on the inside door
and independent rotation. Shelves are self centering
so the flat side will always rest toward the door.
Multi
Shelf Lazy Susans
|
